Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Air Duct Cleaning Cost in Norman?
Air duct cleaning in Norman typically costs $350 to $650 for a standard single-family home, and most jobs land around $450. Larger homes, multiple HVAC systems, or heavy debris and renovation dust push the estimate toward $800 or more. The written estimate you get before any work starts sets the final price, and that estimate is free.
We run our Norman work with professional-grade equipment – Rotobrush contact-cleaning systems and Nikro negative-air and HEPA units – because the tools are what separate a real duct cleaning from a shop-vac pass. Our technicians have up to 13 years of experience, and we treat duct work as the focused craft it is rather than an add-on to a handyman list. Call (866) 493-6592 and we’ll set up a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical Norman air duct cleaning: $350 to $650, with a written estimate setting the final price.
- Homes with two HVAC systems usually run $550 to $900 in total.
- Dryer vent cleaning is a separate line item and closes a fire-safety gap many duct cleaners skip.
- Estimates are free. Call (866) 493-6592.
Air Duct Cleaning Cost Breakdown (2026)
Here’s how the numbers break down for the Norman market. These are typical estimated ranges for residential work, and the final figure depends on your home’s layout, the condition of the ductwork, and how many systems are connected.
| Service or line item | Typical estimated range |
|---|---|
| Single-system home, standard layout | $350 – $500 |
| Single-system home, heavy debris or renovation dust | $450 – $650 |
| Two HVAC systems, whole home | $550 – $900 |
| Duct repair, minor (per affected run or junction) | $150 – $400 |
| Dryer vent cleaning, added to the visit | $100 – $200 |
| Filtration upgrade with Honeywell or Aprilaire components | $200 – $600 installed |
What drives the price up: square footage, the number of air handlers and returns, how accessible the ductwork is in the attic or crawlspace, and how much debris has built up. Renovation dust is the big one – a recent remodel in a Norman home loads the return side with drywall and sawdust, and cleaning that out takes more time and more containment than a routine pass. What brings it down: a single system, accessible runs, and cleaning before dirt has had years to settle into elbows and boots.
Duct repair deserves a note here. Damage we find during cleaning – disconnected runs, crushed flex sections, torn seams – can be fixed in the same visit rather than sent to a second contractor. That’s part of why we offer air duct cleaning and repair together as a matched pair of services.
What Affects Air Duct Cleaning Pricing in Norman
Norman homes aren’t a single market. A mid-century house near the University of Oklahoma campus has a different duct system than a newer build out in the west-side subdivisions, and pricing follows that reality. Here are the factors that move the estimate most.
- Square footage and system count. A modest one-story home with one air handler sits at the low end. Two-story homes with a second system in the attic land in the $550 to $900 range because there’s twice the ductwork and twice the return side to address.
- Duct material and layout. Rigid sheet metal runs clean differently than long flex duct with tight bends. Norman homes in the older neighborhoods around downtown and the campus area often have original rigid metal with decades of settled dust in the elbows, while newer construction in west Norman leans on flex, which can crush or sag if it wasn’t installed with enough slack.
- Recent renovation dust. Drywall dust, sawdust and insulation fibers from a remodel are the most common reason a Norman estimate climbs above the midpoint. Those particles coat every surface inside the duct and need containment-grade extraction – which is where the Nikro and Abatement Technologies equipment earns its place.
- Return-side access. If the return trunk is boxed in or buried behind drywall, setup takes longer. We’d rather tell you that upfront in a free estimate than surprise you with a changed number.
- Filtration and air quality add-ons. Adding a Honeywell or Aprilaire filter or media cabinet during the visit means one appointment instead of two. Typical installed ranges run $200 to $600 depending on the product and the existing cabinet.
- Dryer vent. A clogged dryer vent is a separate system but often the same call, and it’s a real fire risk that never gets smaller on its own. Lint buildup restricts airflow, and a dryer that takes two cycles to dry a load is a signal worth acting on. This line item usually runs $100 to $200.
If your home is closer to Lake Thunderbird on the southeast side, you may have a different concern: humidity. Trapped moisture doesn’t clean itself out of ductwork, and a system that’s been running damp can hold dust that clings rather than lifts. That can move the job toward the upper end of the range. It’s worth mentioning when you call so the estimate reflects it.
How Does Duct Cleaning Work, and Why Does the Equipment Matter?
Duct cleaning works by putting the system under negative pressure, agitating every surface inside the duct, and extracting the loosened debris into a HEPA-filtered containment unit. That’s the short version. The long version matters, because the equipment is the whole ballgame.
We use Rotobrush contact-cleaning systems – the same equipment specified in professional duct cleaning standards – to reach inside the duct and physically contact every surface. A hose waved at an open vent doesn’t do that. We pair it with Nikro negative-air and HEPA equipment to hold particulate in containment while we work, so what comes out of the duct stays out of your living room. For heavier jobs, Abatement Technologies filtration equipment lets us work at a level that basic maintenance cleaning can’t reach.
This matters for Norman homeowners because Oklahoma’s spring dust season and the pollen that coats the outside of every screen also gets pulled into the return side. Fine dust settles into the boots and elbows and stays there for years unless it gets agitated and extracted properly. When we’re done, we can also set up Honeywell or Aprilaire filtration so the system catches more of that dust on the next pass. That clean-repair-upgrade progression is where a specialist beats a generalist every time.
Two things we don’t do, and we’ll say so plainly: we don’t remediate mold and we don’t install HVAC systems. When a job crosses into that territory, you need a specialist in that field. What we can do is clean, repair and filter – which covers most of what a Norman homeowner needs from the air system.
How to Save on Air Duct Cleaning in Norman
Smart sequencing beats haggling. A few practical ways to keep the number down without cutting corners:
- Bundle the dryer vent. Running both systems in one visit costs less than two separate calls because the setup time is shared. Dryer vent cleaning is a safety matter, not an upsell – lint is a leading cause of residential fires, and a clean vent also helps the dryer run more efficiently.
- Time the cleaning after a remodel, not before. If you have a kitchen or bathroom project coming, wait until the dust settles (literally) and then clean. Cleaning first just means doing it twice.
- Address duct repair in the same appointment. A disconnected run wastes conditioning all year, and fixing it during the cleaning visit is cheaper than a return trip.
- Get a written estimate before anyone arrives. A free estimate means you know the number before the work starts and nothing changes it after.
- Ask about filtration now, not later. If your system lacks a decent filter cabinet, adding one during the cleaning visit saves a separate install charge.
The best saving of all is knowing the price upfront. Call (866) 493-6592 for a free estimate with a clear line-item breakdown. We answer 24/7, and we dispatch from 7am to 7pm, Sunday through Friday.
Is It Cheaper to Repair or Replace Damaged Ductwork in Norman?
Repair is usually cheaper than replacement for localized damage, and in most Norman homes that’s the right call. A torn seam, a crushed flex section or a disconnected junction typically runs $150 to $400 to fix. Replacing whole-house ductwork is a different scale of project and usually only comes up when the layout itself is failing across many runs.
Cleaning and repair go together for a practical reason: cleaning reveals the damage. Until the dust is out, you can’t see a tear in the flex or a joint that’s pulled apart. We find it, we fix it, and the air actually goes where it’s supposed to. If you’re wondering whether repair makes sense, call and we’ll walk through it on a free estimate.
FAQs – Air Duct Cleaning Cost
How much does air duct cleaning cost in Norman?
Air duct cleaning in Norman typically costs $350 to $650 for a single-family home, with most jobs around $450. Homes with two HVAC systems usually run $550 to $900. Call (866) 493-6592 for a free estimate – the written estimate sets the final price.
Can you clean my air ducts the same day?
Same-day service is often possible, depending on the schedule. Call (866) 493-6592 to check availability. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Do you clean dryer vents too, and what does it cost?
Yes. Dryer vent cleaning typically runs $100 to $200 when added to an air duct visit, and it’s the most overlooked fire-safety item in a Norman home. The line item usually lands closer to $100 if the vent is short and easy to reach, and higher if the run is long or the vent hood is on a pitched roof. Call (866) 493-6592 for an exact quote.
How much does duct repair cost if you find damage during cleaning?
Minor duct repair usually costs $150 to $400 per affected run or junction – torn seams, crushed flex, disconnected connections. We identify it during cleaning and quote it in writing before the repair starts. Call (866) 493-6592 to talk it through.
Is it worth having air ducts cleaned in an older Norman home?
It usually is, because older homes around the campus area and downtown tend to have duct systems that have accumulated years of settled dust, and the return side often has more of it than the supply. A cleaning pulls that out and lets you see the actual condition of the ductwork. The typical cost is $350 to $650, and the free estimate tells you what your specific home needs before you commit.
What Happens When You Call
You’ll get a clear conversation about your home – its size, its systems, whether there’s been a remodel, and what’s going on with the dryer vent – followed by a free written estimate with line items. We arrive with professional-grade equipment, we work inside containment, and we leave the duct system cleaner than we found it, plus any repairs and filtration upgrades done in the same visit. For more on how we approach the whole job, see duct cleaning Norman.
Call (866) 493-6592 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Norman market as of 2026. Duct Cleaning Norman offers free estimates – call (866) 493-6592.
What Our Customers Say
"Ran a negative air machine on the whole system rather than the shop vac on a stick that the cheap outfit down the road uses. Showed me the before and after photos from inside the trunk line and it was genuinely disgusting."
- Allison Rhodes"Quoted per system rather than the bait and switch per vent pricing everybody else in town uses. The number I was told on the phone was the number on the invoice."
- Carmen Herrera"Two guys, about three hours, plastic down at every register, and they wiped the vent covers before putting them back."
- Roger Padgett